- Colour : Brushed brass Gold / Brass
- Diameter (cm) : 7
Baldwin LED bathroom wall light, opal glass and polished nickel, 20.5 cm
About this light
The Baldwin LED bathroom wall light combines white opal glass, cut as an inverted pyramid, with a rectangular polished nickel backplate that shines like a mirror. Its integrated 3.5 W LED is supplied and delivers 320 lm of warm white light. At 20.5 cm high, it suits a small mirror or a compact bathroom, singly or as a pair.
Guarantees and services
An etched glass inspired by drawer handles
The design starts from antique chest-of-drawers handles: beneath the glass, a small moulded ball serves as the knob, and the square mount echoes a drawer's rosette. The opal glass, acid-etched, is square in section and flares towards the top; it hides the light source and gives an even light. The rectangular backplate and the die-cast parts are finished in polished nickel.
Integrated LED, 3000 K, 320 lm, supplied
The light source is an integrated 3.5 W LED: no bulb to buy, it comes fitted. It emits 320 lm at 3000 K, a warm white that does not yellow your complexion in front of the mirror. Class I, the light must be connected to earth. Its IP44 rating allows it above a washbasin and near a bathtub; only the shower cubicle is off limits.
Compact and vertical: 20.5 cm high
At 20.5 cm high, 11.5 cm wide and with a projection of 13.7 cm, the Baldwin slips in between a mirror and a storage column. Allow one wall light on each side of the mirror, at about 1.60 m from the floor, or a single one above a mirror under 60 cm wide. It weighs 1.49 kg.
Data sheet
- Height (cm)
- 20.5
- Width (cm)
- 11.5
- Depth (cm)
- 13.7
- Number of bulbs
- 1
- IP rating
- 44
- LED colour temperature (K)
- 3000
- Luminous flux (lm)
- 320
- Wattage per bulb (W)
- 3.5
- Weight (kg)
- 1.49
- Protection class
- 1
- Bulb type
- Integrated LED
- Bulbs included
- Yes
Specific References
- ean13
- 5024005332114