Namsos tall graphite bollard light 95 cm for driveways, integrated LED

Graphite body and louvred plate

The silhouette is a long block 24 cm wide and 12 cm deep, in a graphite finish. At the top, a plate fixed with four screws frames an angled opening with horizontal louvres; two screws at the bottom of the front face complete the assembly. There is no other relief: the bollard reads as a dark line in the garden.

A well-protected 9.6 W LED source

The LED is integrated and supplied. At the top of a tall column, it lights a wider area of ground than the low model. The IP65 rating covers rain, dust and water jets, so it can stay outdoors all year round on a driveway or in a car park. Class I: earthed connection required.

Anchoring and spacing of the bollards

At 9.75 kg and almost a metre tall, the bollard must be fixed to a concrete base, with the cable brought in through a buried duct. On either side of an entrance, install two symmetrically; along a driveway, a single row is often enough, provided the bollards are placed closer together on bends.