Dan outdoor wall light in galvanised metal, 2 GU10 up and down spotlights

Galvanised cylinder on a short arm

A round backplate carries a tubular arm that holds the cylinder away from the façade: 13 cm projection in total. The 8 cm diameter cylinder, made of two fitted parts, is open at both ends. The galvanised metal keeps its raw look, with the uneven reflections characteristic of this treatment.

Two GU10 beams, towards the sky and the ground

Each end houses a GU10 lampholder, rated at 35 W per bulb. To limit consumption and heat, choose 5 to 7 W GU10 LED spotlights in 2700 K. The two cones of light draw a vertical line on the wall, above and below the wall light. The IP44 rating allows installation on a wall exposed to rain, on a façade as well as under a porch.

Installation on the façade

At 17.2 cm high and weighing 0.8 kg, the Dan connects to a 230 V earthed supply, as it is Class I. Fitted at around 1.80 m from the ground on either side of a door, it frames the entrance; in a row along a long wall, it gives the façade a rhythm of luminous lines.