Antique brass LED up and down outdoor wall light, 2 lights

A tube in an aged brass tone

The plastic body recreates the look of patinated brass, golden brown with a slight sheen. At the top and bottom it ends in a polycarbonate ring, clear around the edge and frosted on the front, which softens the light output. A square backplate holds it away from the wall; the whole fitting projects just 8 cm, discreet against stone, brick or a light render.

Dual beam in warm white

The two integrated 8 W LEDs together produce 650 lm at 3000 K. The light is emitted in two cones, one towards the sky, the other towards the ground, tracing a vertical pattern on the facade that marks the entrance. This version works at full power only, without dimming. Thanks to its IP44 rating, it withstands rain and splashes, under a canopy or on an exposed wall.

Fitted on either side of the door

At 5 cm wide, the cylinder fits on a narrow pier or a gatepost. Fit one on each side of the door, at around 1.80 m from the ground, to mark the entrance symmetrically. Class II: no earth connection is required.