Stainless Steel Up & Down Outdoor Wall Light, 2 GU10, Motion Sensor

A brushed stainless steel tube with two outlets

The elongated stainless steel body is ribbed with several horizontal grooves and closed at each end by a clear, frosted diffuser. It is carried by a rectangular backplate, also in stainless steel, which houses the infrared sensor beneath the tube. The width remains 7 cm and the light projects 11 cm from the wall.

Two beams, towards the sky and towards the ground

Each end takes a GU10 bulb of 35 W maximum; choose warm white LEDs. The upper beam draws a line of light on the wall, while the lower one lights the path; the sensor avoids leaving the whole fitting on all night. The GU10 cap is a standard format, easy to find in LED. With its IP44 rating, it can stay outdoors in all weathers, on a bare façade or under an overhanging roof.

Positioning around the entrance

Allow roughly 1.80 m between the ground and the bottom of the wall light, next to the door or above the garage. Choose a spot from which the sensor has a clear view of the approach path. Class I: connect the earth.