Oslo galvanised steel gooseneck outdoor wall light, E27

Galvanised arm and disc shade

A round backplate is screwed to the wall; from it a curved tube rises and then curves forward to carry the lantern. The lantern consists of a small dome, a large flat disc and two narrower rings, stacked above a clear polycarbonate globe. The steel is hot-dip galvanised and left in its natural metallic shade.

E27 bulb not included

The E27 lampholder takes a bulb of up to 60 W, to be purchased separately. The clear globe shows the light source: choose a 2700 K filament LED to keep the look of an old-fashioned lantern. The IP55 rating protects against dust and water jets from all directions, so it can stay on an exposed façade. Class II: double insulation, no earth wire required.

Dimensions and mounting height

The wall light measures 27 cm wide by 27 cm high and weighs 2.7 kg. Allow 39.5 cm of projection from the wall: check that a shutter or door leaf will not knock against it. Position it at about 1.80 to 2 m above the ground, beside the door, to light the lock and the threshold.