Bern square stainless steel outdoor wall light, clear glass, 24.5 cm

A stainless steel square with curved clear glass

The square front plate, made of stainless steel, is mounted on a die-cast aluminium back plate. The clear glass, curved across its width, rests against it and protects the lampholder and its reflector. Two horizontal metal bands hold it in place, fixed by a small screw on the left. The whole remains geometric and crisp, suited to contemporary architecture.

IP54 and E27 bulb

The IP54 rating means dust does not impair its operation and water splashes do not damage it: rain from the front, wall without an overhanging roof. The wall light takes a 60 W E27 bulb, not included. A clear LED bulb, globe or filament, shows off the transparent glass; if dimmable, it can be used with a dimmer. Class I: earth connection required.

Dimensions and installation tips

24.5 cm per side, 12 cm projection and 3.24 kg. The housing is fixed flat against the wall. On either side of a garage or entrance door, two lights at eye level, around 1.70 m, give structure to the façade.