Etere mirror wall light, anthracite grey LED tube, 30 cm, 1350 lm

Two grey end caps, one tube of light

Contrast is the appeal of this finish: the anthracite aluminium of the end discs and the bracket frames an opal cylinder which, when lit, appears to float in front of the wall. The line is horizontal and low, 7 cm high, so it slips in between a mirror and a low ceiling.

LED source supplied, evenly spread light

The 10.2 W LED is factory-fitted inside the tube; there is nothing more to buy, and it cannot be dimmed, as the intensity is fixed. The 1350 lm come out across the whole surface of the diffuser, in an even sheet of light downwards and to the sides. Rated IP44, it withstands the steam and splashes of a washbasin; do not install it above the bath. Class I connection, with earth conductor.

Fixing by central bracket

A single bracket in the middle carries the 0.59 kg weight of the wall light, which projects 10 cm. Allow for the cable outlet in line with the centre of the mirror. For a wider mirror, two Etere lights placed in line cover the width without any gap in the light.