In stock
Styrka leopard print banana fibre petal pendant light, antique brass
Brand: Markslöjd
About this light
This Styrka petal pendant light unfolds a corolla of banana fibre printed in a leopard pattern, edged in beige, that lets the light filter through. At the centre, a small amber glass globe surrounds the bulb. At 75 cm in diameter, it is made for a large dining table or the centre of a living room.
Guarantees and services
A leopard corolla in banana fibre
The banana fibre petals, stretched over a fine hoop, overlap around the central axis to form a large open flower. The leopard print, subtle up close, becomes a graphic pattern when the lamp is lit. The stem, ceiling plate and small rivets are in antique brass finish metal, and the fabric cable is grey.
Light softened by the fibre
An E27 bulb of 40 W maximum fits inside the amber glass globe; it is not supplied. The fibre gives a soft light, downwards and through the petals. To vary the brightness, choose a dimmable bulb with a dimmer switch. IP20 rating: dining room, living room or bedroom, not a damp room.
75 cm wide for a large table
The light hangs from a ceiling hook. It measures 60 cm high by 75 cm wide and weighs 1.3 kg; the 200 cm cable leaves plenty of room to choose the hanging height. Above a table, keep about 70 cm between the bottom of the petals and the tabletop.
Data sheet
- Height (cm)
- 60
- Room
- Dining room
Living room
- Colour / finish
- Antique brass, Beige
- Materials
- Metal, Glass, Banana fibre
- Number of bulbs
- 1
- IP rating
- 20
- Wattage per bulb (W)
- 40
- Weight (kg)
- 1.3
- Diameter (cm)
- 75
- Protection class
- 1
- Bulb type
- E27
- Dimmable
- Depends on the bulb
- Voltage (V)
- 230 V
- Cable length (cm)
- 200
- Bulbs included
- No
- Style
- Modern
Specific References
- EAN13
- 7330024622586