Sardo black wall light, amber glass cylinder and E27 cap

Matt black steel and amber cylinder

The round backplate, the horizontal arm and the vertical stem are made of black steel. The amber glass cylinder is held on the stem by small screws, visible in the photo, and completely surrounds the lampholder. A fine clear line marks the bottom of the glass. The black of the metal brings out the honey colour of the diffuser.

An E27 bulb of your own choice

The E27 lampholder takes a bulb of 40 W maximum, and no bulb is supplied with the wall light. An LED with visible filament, as in the photo, shows off the tinted glass: choose 2700 K to stay within golden tones. IP20 rating: keep it for dry rooms or, in a bathroom, above the mirror, away from the shower and bath.

Fitting on a living room or bedroom wall

At 29 cm high and 13 cm wide, it is a compact wall light. In a hallway or living room, position it at about 1.70 m from the floor so that the cylinder sits above eye level. As a pair on either side of a bed or a sideboard, it frames the piece of furniture. 230 V connection.